Publicidad
Idiomas disponibles
Idiomas disponibles
Assembly Guide
1
Bend the landing gear and install it to the
landing gear slot under the fuselage
3
Tighten the propeller with the 1.5mm wrench
provided
5
Ensure the tube is fully inserted so the wing
halves make contact
2
Slide the propeller onto the motor shaft
4
Pre assemble main wings by
wing strengthening tube into the hole on the
main wings
6
Disassemble and reinsert the main wings
over the tube from each side of the fuselage
5
inserting the
Publicidad
