Drive Wheels; Ridging Intensity; Tractor Gauge - Checchi & Magli FOXDRIVE Manual De Uso Y Manutención

21.0 - DRIVE WHEELS

During work, the drive wheels must hold the ground constantly to operate the
transplanting equipment. The tractor's hydraulic lift unit must be completely lowered
and the drive wheels positioned suitably.

22.0 - RIDGING INTENSITY

To increase the ridging intensity of the ground near the plant, proceed as follows:
22.1 - Lengthen the adjustable arm of the tractor's third point (fig. 18.C)
22.2 - Tighten the adjustment device (fig. 18.A) to give more pressure to the spring
(fig. 18.B)
22.3 - To reduce the ridging intensity, carry out the above operations in reverse
order.

23.0 - TRACTOR GAUGE

The imprint left on the ground by the wheels of the tractor, as well as having a
compacting effect, also usually lowers the surface of the ground. Keep a
transplanting distance of not less than 10-12 cm from the imprint (fig. 19) by
adjusting the inter-row spacing or the gauge of the tractor.
A
B
MIN. cm 10
C
÷
12
FOXDRIVE
FOXDRIVE - DT
÷
MIN. cm 10 12
FIG. 18
FIG. 19
45