Position; Ma / 50 Ma / 500 Ma / 10 A Positions; Range Key - Metrix MX 553 Manual De Instrucciones

Chapter II
4.1.5.

position

4.1.6. 5 mA / 50 mA / 500 mA / 10 A positions

4.2.

RANGE key

. In AUTO mode to switch to MANUAL mode (short press).
. In MANUAL mode, to select the next range (short press) or return to AUTO mode (long
press).
Measurements concerned: AC or DC voltages, capacitance, resistance.
. When making time measurement : if the range change made during previous
measurements (Voltage) was in manual mode, it may be necessary to adapt this
measurement range to the signal level injected at the input. This is why the RANGE key
is used to change from one range (Voltage) to the next range. The new range is then
displayed for 2 seconds.
Benchtop multimeter
Capacitance measurement
SEL
Diode voltage measurement
SEL
DC current measurement
SEL
AC current measurement
SEL
AC+DC current measurement
SEL
23