Dustcontrol DC Tromb 600 Traducción Del Manual De Instrucciones De Servicio Original página 15

Motor 600
DC Tromb 600 is powered by three 1-phase fans. These can be controlled individually using buttons on the engine package.
Above: the three buttons that control the motors
If you do not use all the engines at the same time, it is important to vary which engine is running. This is so as not to wear out one
of the engines unnecessarily. For each engine there is a non-return valve. If you run 1 or 2 of the motors at the same time, the
valves are used to ensure that the air flow goes in the right direction.
The dust collector has the following discharge option:
L – Longopac: The machine is equipped with a flexible bag system, in which the dust is collected in a closed system.
DC Tromb 600, 99063-A 15