Using The Appliance; Installation - VALBERG WF 712 D W701T Instrucciones De Uso

B

Installation

Removing the transit bolts
 Before using the washing machine, remove the 4 transit bolts and rubber washers
located at the rear of the machine. Failure to comply with this instruction may cause strong
vibrations, a high level of noise and damage to the machine, rendering the warranty null
and void.
 Loosen the transit bolts by turning them anticlockwise with a suitable spanner.
Ž Remove the transit bolts by pulling them straight out.
 Fit the plastic blanking plugs supplied with the accessory kit on the holes left once the
transit bolts have been removed. Keep the transit bolts for later use.
NOTE
Remove the transit bolts before using the machine for
the first time. Faults resulting from a machine used
with the transit bolts still attached are not covered
by the warranty.

Using the appliance

4
X
1
4
X
3
5 EN
4
X
2
4