Publicidad
Idiomas disponibles
Idiomas disponibles
c)
By properly installing the cutting blade in the sledge, the user can adjust the
shape and depth of cut.
Insert the ends of the cutting blade into the selected holes. The selection of the
hole depends on the expected shape of the cut. The wider the blade is mounted,
the more U-shaped the shape will be.
d) Slide the blade into the holes to the desired depth. The deeper the blade is
inserted (its ends will protrude above the sled), the shallower the depth of cut.
e) Once the blade is given the desired shape, tighten the nuts so that the blade is
securely fastened.
f)
Using the wrench provided, loosen the nuts in the mount counterclockwise.
Publicidad
