hillvert HT-LOGAN-14SA Manual De Instrucciones página 44

Caution: Incorrectly installed spark plug or a spark plug of a different type than the
one originally installed in the device can cause engine damage.
•
CAUTION!: Do not start the engine without the air filter in place.
To clean the air filter:
- Remove the filter cover. Remove dirt and wash the cover.
- Remove the filter and check its condition. Wash it or replace it if it is damaged or
worn.
- Wash the filter in clean fuel and then squeeze it.
- Put and secure the filter in place, then put on the cover.
STORING (over 30 days)
Before storing the device for more than 30 days, perform the following steps:
1. Clean the device and remove dirt.
2. Check the technical fitness of the device, confirm there are no damages,
loosening, missing parts, etc.
3. Drain the fuel from the fuel tank, carburetor and fuel lines.
4. Remove the spark plug, pour ca. 15 ml of oil into the cylinder. Gently and
slowly pull the starter cord handle to distribute the oil and lubricate the
cylinder. Reinstall the spark plug.
5. Clean the air filter.
Air filter