Descargar Imprimir esta página

Cleaning The Dust Container; Cleaning The Filter Frame; Cleaning The Fine Dust Filter; Starting The Comfortclean Self-Cleaning Function Manually - Miele Blizzard CX1 PureSuction PowerLine Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

The contents of the dust compartment
can be disposed of with the normal
household trash, providing it contains
general household dust only.
 Hold the dust container close to the
trash can so that as little dust billows
out as possible.
 Press the yellow release button on
the bottom of the dust container.
The flap will open and the dust will fall
out.
 Close the flap firmly. It should click
into place.
 Insert the dust container down into
the vacuum cleaner so that it audibly
clicks into place.
 Push the handle down.

Cleaning the dust container

Clean the dust container as required.
 Clean the dust container using water
and liquid dish soap.
 Dry the dust container carefully.
Cleaning the filter
frame (Figs. 25 + 26)
A removable filter frame is located in the
dust container. This should be cleaned
if it is obviously dirty.
 Place the emptied and open dust
container on its front.
 Release the filter frame and remove it.
 Empty the filter frame and rinse it un-
der cold running water.
Do not use detergent!
Do not use any sharp or pointed ob-
jects!
Dry the filter frame carefully!
 Place the dry filter frame in the dust
container so that it audibly clicks into
place.

Cleaning the fine dust filter

The fine dust filter is equipped with a
self-cleaning function. When a specified
degree of soiling is reached, the vac-
uum cleaner switches off automatically
for approx. 20 seconds and carries out
a cleaning process. You will hear this
process running.
The ComfortClean button on the vac-
uum cleaner lights up yellow.
Starting the ComfortClean self-clean-
ing function manually (Fig. 27)
If you are vacuuming a large amount of
dust at once, the ComfortClean self-
cleaning function should be started
manually either during a vacuuming
pause or immediately afterward. This
enables the vacuum cleaner to achieve
the very best cleaning performance
again right away.
 With the vacuum cleaner switched
on, press the ComfortClean button
for at least two seconds.
The vacuum cleaner is switched off au-
tomatically for approx. 20 seconds and
a cleaning process is carried out which
results in operational noise.
The ComfortClean button on the vac-
uum cleaner lights up yellow.
The vacuum cleaner will then switch
back on automatically and will operate
with the previously selected setting.
en-US
19

Publicidad

loading

Este manual también es adecuado para:

Blizzard cx1 turboteam powerlineSkce0Skre0