Sony FW-100BZ40J Manual De Instalación página 12

FW-32BZ30J only
1
Detaching the Table-Top Stand
from the LCD Monitor.
To detach the Table-Top Stand from the LCD
Monitor, remove the screws.
Note
• Do not remove the Table-Top Stand for any reason
other than to install corresponding accessories on
the LCD Monitor.
• Be sure the LCD Monitor is vertical before turning
on. To avoid uneven picture uniformity do not
power on the LCD Monitor with the LCD panel
facing down.
• Place the LCD Monitor with its screen facing down
on a level and stable surface covered with a thick
and soft cloth when removing the Table-Top Stand
from the LCD Monitor to prevent damaging the
surface of the LCD Monitor.
2
Remove the screws from the
rear of the LCD Monitor.
12
(GB)
Soft cloth
3
Attach the Wall-Mount Bracket
(not supplied) using the screws
(not supplied).
Screw (not
supplied)
Wall-Mount
Bracket (not
supplied)
Note
• If using an electric screwdriver, set the torque at
approximately 1.5 N·m {15 kgf·cm}.
Soft cloth