Temperature Settings Warnings; Accessories; Ice Tray (In Some Models) - EAS ELECTRIC EMC1852FW Manual De Instrucciones

3.3 Temperature Settings Warnings

• Your appliance is designed to operate
in the ambient temperature ranges
stated in the standards, according to
the climate class stated in the infor-
mation label. It is not recommended
that your fridge is operated in the
environments which are outside of
the stated temperature ranges. This
will reduce the cooling efficiency of
the appliance.
• Temperature adjustments should be
made according to the frequency of
door openings, the quantity of food
kept inside the appliance and the
ambient temperature in the location
of your appliance.
• When the appliance is first switched
on, allow it to run for 24 hours in
order to reach operating tempe-
rature. During this time, do not open
the door and do not keep a large
quantity of food inside.
• A 5 minute delay function is applied
to prevent damage to the compres-
sor of your appliance when connec-
ting or disconnecting to mains, or
when an energy breakdown occurs.
Your appliance will begin to operate
normally after 5 minutes.
Climate class and meaning:
T (tropical): This refrigerating applian-
ce is intended to be used at ambient
temperatures ranging from 16 °C to
43 °C.
ST (subtropical): This refrigerating ap-
pliance is intended to be used at
ambient temperatures ranging from
16 °C to 38 °C.
N (temperate): This refrigerating ap-
pliance is intended to be used at
ambient temperatures ranging from
16 °C to 32 °C.
SN (extended temperate): This refrig-
erating appliance is intended to be
used at ambient temperatures ran-
ging from 10 °C to 32 °C.

3.4 Accessories

Visual and text descriptions in the
accessories section may vary accor-
ding to the model of your appliance.

3.4.1 Ice Tray (In some models)

• Fill the ice tray with water and place
in the freezer compartment.
• After the water has completely fro-
zen, you can twist the tray as shown
below to remove the ice cubes.
3.4.2 The Storage Box
You can adjust and use this depart-
ment for 2 different functions.
(The images are representative)
Sliding cover
Your fridge is delivered to you with
the cover shown in the open position.
Declared energy consumption and volu-
me are defined according to the Chiller
option of the product.
To use for 0 °C department: If you want
to use this compartment as a 0 °C box,
you must take the sliding cover (indi-
cated in the picture) from the closed
position to the open position.
To use for Crisper department: If you
want to use this compartment as a Cris-
per, you must take the sliding cover
(indicated in the picture) from the open
position to the closed position.
While this department is used as a 0
°C department, keeping food in the
Chiller, compartment instead of the
freezer or refrigerator compartments,
allows food to retain freshness and
EN - 64 V.1