What You Need - Extremis Marina Instrucciones De Montaje

ASSEMBLY MARINA TABLE

WHAT YOU NEED

min. 2 people
nr. 10 - 17 spanner
nr. 3 - 4 hex key
+/- 60-120 min.
(depending on the length
of the table)
2. Now screw the adjustable foot into the leg. Repeat step 1
through 2 for each table leg assembly and put them aside.
4 assembly marina desk
1. Insert the table leg into the tabletop connection, aligning the 3 holes, and use 6
M6x16 hexagon socket bolts and 6 lock nuts to fasten them. First push all the bolt
shafts through the holes and make sure that the bolts are on the outside. Then thread
the nuts onto the shafts of the bolts and tighten them firmly.
3. Put the 5/6 tabletop profiles on the floor, with the slots facing
upwards, and make sure that the crosses are facing the same
way. Insert a spacer between each profile at +/- 40 cm from the
end.