Terraillon POWER STEPPER Manual De Instrucciones página 21

FOOT AND LEG STIMULATION (
POWER STEPPER - INSTRUCTION MANUAL
)
Step 1 - Place the device on the floor.
• Place the device on the floor a comfortable distance from your chair. Sit down on your chair.
WARNING:
Never stand on the Power Stepper.
Step 2 - Place both bare feet onto the footpads.
• Remove all socks and stockings and place bare feet onto the footpads. The arch of your foot
should be positioned on the raised instep on the footpads. It does not matter if your feet are
smaller or bigger than the footpads.
• Both the footboards of the POWER STEPPER can tilt back and forth improve create ankle joint
movement for increasing circulation and reducing swelling. The footboards will tilt back and forth
as per your feet rocking motion.
• This type of exercise therapy is recommended widely by health professionals to improve
circulation and, when used in conjunction stimulation, the results are significant.
CAUTION:
Two feet are required to create the stimulation at the desired level.
With only one foot, the device does not go beyond level 10 (safety level).
Sit with your knees both at a 90 degree angle.
Step 3 - Turn on the device
• Press the power button [ ] on the device or use the remote control.
In the default setting.
• The screen displays [ ] 30 minutes, [
[ ] display 0000.
Step 4- Setting the treatment time
• Set the treatment time by using the
• The treatment time can be adjusted from 5 to 90 minutes.
EN
] 00 output intensity, [
[ ] buttons on the remote control.
] 00 output intensity.
21