Descargar Imprimir esta página

Terraillon POWER STEPPER Manual De Instrucciones página 26

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 52
Stimulation is uncomfortable
My legs are aching after treatment.
Output current stops during therapy
NORMALIZED SYMBOLS
Caution!
Applied part of type BF
Type of protection against electric shock: Class II Equipment
Disposal in accordance with Directive 2012/19/EU (WEEE)
The name and the address of the manufacturer.
Complies with the European Medical Device Directive (93/42/EEC) and amended by directive 2007/47/EC
0197
requirements. Notified body TÜV Rheinland (CE0197)
Refer to Instruction Manual.
Keep dry
SN
Manufacturer date and series number
The first number 2: Protected against solid foreign objects of 12, 5 mm and greater. The second number:
IP21
Protected against vertically falling water drops. Vertically falling drops shall have no harmful.
26
EN
POWER STEPPER - INSTRUCTION MANUAL
Is the intensity too high?
Electrode active area size is too small.
Are you using the device correctly ?
You may have the intensity on a too high
setting and your muscles are working too
hard.
Is the adaptor properly connected with
unit?
Have the batteries been exhausted?
Choose a lower intensity.
Replace electrodes with ones that have an
active area no less than 16.0 cm
4 cm).
Please check manual before the use.
Choose a lower intensity and leave
adequate time after each treatment to
allow the muscles to recover (just like after
vigorous exercise!).
Firmly connect the adaptor with the unit.
Please replace them with new batteries.
(4 cm x
2

Publicidad

loading