Descargar Imprimir esta página

Proper Usage; Maintenance Checklist; Product Specifications - Vision Fitness VST600-FW82 Guia De Inicio Rapido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
IMPORTANT SAFETY INFORMATION
It is the sole responsibility of the purchaser of VISION products to instruct all individuals, whether
they are the end user or supervising personnel on proper usage of the equipment.
It is recommended that all users of VISION exercise equipment be informed of the following information prior to its use.
Do not use any equipment in any way other than designed or intended by the manufacturer.
It is imperative that VISION equipment be used properly to avoid injury.
INSTALLATION
STABLE AND LEVEL SURFACE: VISION exercise equipment must be installed on a stable base and properly leveled.
MAINTENANCE
1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use
only replacement parts supplied by your country's local VISION dealer.
2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important
information. If unreadable or missing, contact your VISION dealer for a replacement.
3. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well
as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals.
4. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to
do so. VISION dealers will provide service and maintenance training at our corporate facility upon request.
ADDITIONAL NOTES
This equipment should only be used in supervised areas where access and control is specifically
regulated by the owner. It is up to the owner to determine who is allowed access to this training
equipment. The owner should consider a user's: degree of reliability, age, experience, etc.
This training equipment meets industry standards for stability when used for its intended
purpose in accordance with the instructions provided by the manufacturer.
This equipment is for indoor use only. This training equipment is a Class S product (designed for use in a commercial
environment such as a fitness facility). This training equipment is in compliance with EN ISO 20957-1.
4
WARNING

PROPER USAGE

1. Do not exceed weight limits of the exercise device.
DEATH OR SERIOUS INJURY CAN OCCUR ON THIS
EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID
2. If applicable, set safety stops to appropriate height.
INJURY!
3. If applicable, adjust seat pads, leg pads, foot pads, range of motion
1. Keep children under the age of 14 away from this
strength training equipment. Teenagers must be
adjustment, or any other type of adjustment mechanisms to a comfortable
supervised at all times while using this
start position. Make certain that the adjusting mechanism is fully
equipment.
engaged to prevent unintentional movement and to avoid injury.
2. This equipment is not intended for use by persons
with reduced physical, sensory or mental
4. Sit on bench (if applicable) and get into appropriate position for exercise.
capabilities, or lack of experience and knowledge,
5. Exercise using no more weight than you can safely lift and control.
unless they have been given supervision or
instruction concerning use of the equipment by a
6. In a controlled manner, perform exercise.
person responsible for their safety.
3. All warnings and instructions should be read and
7. Return weight to its fully-supported start position.
proper instruction obtained prior to use. Use this
equipment for its intended purpose ONLY.
4. Inspect the machine before use. DO NOT use
machine if it appears damaged or inoperable.

MAINTENANCE CHECKLIST

5. Do not exceed weight capacity of this equipment.
6. ALWAYS use a spotter if using free weights.
7. Balance the weight applied to this equipment
ACTION
and/or any barbell. Where applicable, use
retention devices to retain weight discs.
Clean Upholstery
8. Injuries to health may result from incorrect or
excessive training. Cease exercise if you feel faint
Inspect Cables
or dizzy. Obtain a medical exam before beginning
an exercise program.
Clean Guide Rods
9. Keep body, clothing, hair, and fitness accessories
free and clear of all moving parts.
Inspect Hardware
10. Adjustable stops, where provided, must be used
at all times.
Inspect Frame
11. When adjusting any adjustable mechanism (stop
position, seat position, pad location, range of
Clean Machine
motion limiter, pulley carriage, or any other type),
make certain that the adjustable mechanism is fully
engaged prior to use to prevent unintended motion.
Clean Grips
1
12. Manufacturer recommends that this equipment be
secured to the floor to stabilize and eliminate
Lubricate Guide Rods
rocking or tipping over. Use a licensed contractor.
13. If equipment is NOT secured to floor: NEVER allow
1
Upholstery & Grips should be cleaned with a mild soap
resistance straps, ropes or other means to be
and water or a non-ammonia based cleaner.
attached to this equipment, as this may result in
Cables should be inspected for cracks or frays and immediately replaced if present.
2
serious injury. NEVER use this equipment for
If excessive slack exists cable should be tightened without lifting the head plate.
support during stretching, as this may result in
serious injury.
3
Guide rods should be lubricated with Teflon based lubricant. Apply the
14. DO NOT REMOVE THIS LABEL. REPLACE IF
lubricant to a cotton cloth and then apply up and down the guide rods.
DAMAGED OR ILLEGIBLE.
Plate-loaded / Free Weight
FREQUENCY
1
Daily
Daily
2
Monthly
Monthly
Bi-Annually
As Needed
As Needed
3
As Needed

PRODUCT SPECIFICATIONS

Maximum User Weight
100 kg / 220 lbs.
Maximum Training Weight
200 kg / 440 lbs.
Product Weight
42 kg / 92.6 lbs.
Overall Dimensions
135 x 70 x 51 cm /
(L x W x H)*
53" x 27.5" x 20"
* Ensure a minimum clearance width of 0.6 meters (24") for access to and pas-
sage around VISION strength equipment. Please note, 0.91 meters (36") is the
ADA recommended clearance width for individuals in wheelchairs.
5

Publicidad

loading