Descargar Imprimir esta página

High Pressure Operation; Operation With Detergent; Interrupting Operation; Finish Operation - Kärcher K 5.55 M Manual De Instrucciones

Ocultar thumbs Ver también para K 5.55 M:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 38
water discharging from the HP outlet is
free of bubbles. Switch off appliance
and reconnect HP hose.
Note: Fill suction hose with water be-
fore use, this will help ventilate the
pump of air.
Start up
Caution
Use the high pressure cleaner only when
you have mounted the water filter.
Unwind the HP hose from the hose reel.
Push the appropriate spray lance on to
the trigger gun and fasten it by turning it
through 90°.
Open tap.
Plug in the main plug.
Set main switch to "I/ON".
Press safety catch on the trigger gun to
release it and pull lever.

High pressure operation

Risk of injury
The trigger gun is subjected to a recoil force
when the water jet is discharged. Make
sure that you have a firm footing and are
also holding the trigger gun and spray lance
firmly.
Spray lance with pressure regulation
Carrying out the most common cleaning
tasks. The work pressure can be stageless-
ly regulated between "Min" and "Max".
Release the lever on the trigger gun.
Turn the spray lance to the desired po-
sition.
Spray lance with dirt blaster
For strong contaminations.

Operation with detergent

Note
Detergent can only be added when the ap-
pliance is being operated in low pressure
mode.
All washing brushes supplied by Kärcher
are designed for use with detergents.
All manuals and user guides at all-guides.com
DT suction infeed from DT tank
During low pressure operation, detergent is
automatically sucked in from the filled de-
tergent tank.
Recommended Cleaning Method
1 Spray a small dose of the detergent on
2 Wash off the loosened dirt using the
Detergents
To ensure a trouble-free operation of the
appliance and to match the individual
cleaning task, we recommend our Kärcher
detergent and maintenance agents. Please
ask for our advice, or request information
on the products.
Use spray lance with pressure regula-
tion (Vario Power).
Turn the spray lance to "Mix" position -
low pressure.
Fill the detergent reservoir with, deter-
gent tablet and water or detergent con-
centrate and water (observe metering
recommendations on the packaging la-
bel of the detergent).
Dose the detergent at the DT filter.
- Medium quantity: Central position
- Large quantity: "+" position
- Small quantity: "-" position
the dry surface, and allow it to react
(make sure the detergent does not dry
up).
high-pressure jet.

Interrupting operation

Release the lever on the trigger gun.
During breaks, use the safety catch to
secure the trigger gun lever.
During longer breaks (more than 5 min-
utes), also turn the appliance off using
the ON/OFF switch.

Finish operation

If detergent has been added: Suspend
detergent suction hose in a container
filled with clear water, switch the appli-
ance on for around 1 minute once the
spray lance has been removed and
rinse until water runs clear.
13
English

Publicidad

loading