Macros - One for All OARN08G Guia Del Usuario

All manuals and user guides at all-guides.com

Macros

The Macro feature lets you execute a sequence of commands
with one keypress. Any sequence of commands that you
regularly perform (up to a maximum of 15 per macro) can be
stored as a Macro under one of the 1–8 number keys (up to 8
macros).
Programming a Macro
Important:
1. Press and hold the MACRO key until
the POWER key turns on and remains
on. The remote is now in Macro
Programming mode.
2. Press the number key (1–8) you want
to use for this macro. The POWER key
blinks once, then remains on.
Note:
3. Press the device key for the first device you use in the
macro. The POWER key blinks once and remains on.
4. Press each key you want to use in this Macro, in the exact
order the keys would be pressed if you were executing the
sequence yourself. The POWER key blinks each time a key is
pressed. Continue this process for all keys to be included in
the Macro sequence under the given component mode.
Important:
5. Once you are finished programming the Macro, press the
MACRO key to save it. The POWER key illumination turns
off, and the Macro is now ready to use.
Notes:
function is assigned to the Macro sequence.
automatically saved after the 15th keypress.
sending each command in a programmed Macro sequence.
Using a Macro
1. Press the MACRO key.
2. Press the number key assigned to the Macro sequence you
want to execute. The POWER key blinks once, then remains
on.
As the remote sends each command in the Macro sequence,
the POWER key blinks once. After the remote sends the last
command in the Macro sequence, the POWER key illumination
turns off.
14