Direct Code Entry - One for All OARN08G Guia Del Usuario

All manuals and user guides at all-guides.com

Direct Code Entry

Direct Code Entry lets you enter a code from the accompanying
code list for your brand of device. It's not as easy as the other
methods, but it's potentially the fastest method.
TIPS:
assign them to a device type. See the Assigning the AUX1 and
AUX2 Keys section.
1.
Manually turn on the device you want to control.
2.
Find the Code List that came with the remote. Locate the
section for the type of device you're trying to program, and
find your brand in that section. Circle the codes for your
brand and keep them handy.
3.
Press and hold the device key you want to program (the
POWER key comes on).
While you're holding down the device key, use your other
hand enter the first five-digit code for your brand in the
code list (the POWER key goes off after the first digit).
4.
When you've finished entering the five-digit code, keep
holding down the device key and look at the POWER key.
Is the POWER key illuminated?
YES: You're done! You've programmed this device key.
NO, it blinked four times and turned off: You have
either entered a code number that is not in the code lists or
missed a step in the code entry procedure. Try step 3 again.
NOTES
in the list.
provided in the Code Retrieval section of this manual.
If you release the device key any time during the Direct Code
key is retained.
6