One for All OARN08G Guia Del Usuario página 8

All manuals and user guides at all-guides.com
NOTES
pointed at the IR sensor of the device you are programming
the remote to control.
four times and the last programmed code under that device
search method.
Testing the Code for Maximum Functionality
1. Try a variety of the device's functions with the remote. If
some features of your devices don't work, go to the next
step to try a different code.
2. Repeat the Manual Code Search and Entry Method from
the beginning. When the device turns off for the first time,
don't press the OK key, which would store the same code.
Instead, with the unit now off, continue to press the SKIP
FWD key repeatedly until the unit turns back on.
3. Once the unit turns back on, you have found another code
that operates the device. Press the OK key.
4. Test the key's functionality again by trying a variety of
functions. If the code controls the majority of the device's
functions, programming is complete. If the code stored
does not give maximum functionality, try another code.
8