Step 1: Install Your Batteries; Battery Saver; Step 2: Program Your Remote - One for All OARN08G Guia Del Usuario

All manuals and user guides at all-guides.com

Step 1: Install your batteries

Your universal remote requires three AAA alkaline batteries
(not included).
To install the batteries:
1.
Remove the battery compartment cover.
2.
Insert the batteries, matching the (+) and (–) marks inside
the battery compartment.
3.
Push the battery cover back into place.
Battery Precautions:
and National Regulations.

Battery Saver

Your universal remote control saves battery power by
automatically turning off if any key is pressed for more than
60 seconds. This saves your battery life should your remote
get stuck in a place where the keys remain depressed, such as
between sofa cushions.

Step 2: Program your remote

To use this universal remote with your home entertainment
system, first you need to program it to control your devices.
There are four ways you can program the universal remote to
operate your devices:
Auto Code Search goes automatically through all the
codes for the device you're trying to control. It's the easiest
method, but it can sometimes take longer than some of the
other programming methods.
Brand Code Search searches through the codes for
select brands of devices. It's not as easy as the auto code
search, but it can be faster.
Direct Code Entry lets you enter a code from the
accompanying code list for your brand of device. It's not as
easy as the other methods, but it's potentially the fastest
method. Note: Direct Code Entry is usually the best method
to use for audio devices.
Manual Code Search lets you manually go through all
the codes for the device you're trying to
Care and Maintenance
environments.
2
control.