Descargar Imprimir esta página

Pramac QX20 AC EVO S4 Manual De Uso Y Mantenimiento página 30

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 55
QX 20P EVO
Control Handle
Component
Item
Description
11
Display
Battery state, hours counter
12
Lift/lower command
Controls the lifting/lowering of forks.
13
Throttle
Controls the driving speed and direction
14
Warning signal button
Activates a warning signal.
15
Collision safety switch
Safety function which, when activated, forces the
truck to reverse for approx. 3 seconds and then cuts
out until the controller is briefly restored to neutral.
Low Voltage Protection
This vehicle has a low-voltage protection function.
When the battery voltage is less than, the vehicle will
appear that the driving speed is slow, but the fork can
be lifted. And now the battery needs to be charged.
Key switch
Switches the truck on and off. Removing the key prevents the truck from being switched on by unauthorized personnel.
Display
The truck is fitted with a display that lights on when the truck is turned on and displays the battery status and the operating hours. In case of inactivity of the truck, the
indicator automatically turns off, lighting again with a new usage.
Battery status: a segmented bar shows the battery capacity; when all segments have disappeared the capacity is below 20% and the battery must be recharged. This
condition is identified by the indication "LOW BATTERY" replacing the segmented bar.
Operating hours: time when the truck is in operating position (tiller switch active)
Power up test
On power up the display shows:
– the operating hours
– the charge status
Identification points and data plates
For queries regarding the truck or ordering spare parts always quote the truck serial number (4).
Item
Description
Item
1
Manufacturer
9
2
Device name
3
Type and specification
4
The machine number
5
Rated lifting weight
6
Battery voltage rating
7
Year of manufacture
8
With weight of battery
2
Description
Battery weight
28
Item
Description
1
Travel switch
2
Tiller
3
Key switch
5
Emergency switch
6
Side arm
7
Caster wheel
4
Item
Description
8
Drive wheel
9
Folding operator platform
10
Ram protection
3

Publicidad

loading

Este manual también es adecuado para:

Qx20p ac evo s4