Publicidad
Idiomas disponibles
Idiomas disponibles
The following maintenance checklist states the tasks and intervals after which they should be carried out. Maintenance intervals are defined as:
W = Every 50 service hours, at least weekly
A = Every 250 operating hours
B = Every 500 operating hours, or at least annually
C = Every 2000 operating hours, or at least annually
W service intervals are to be performed by the customer.
In the run-in period - after approx. 100 service hours - or after repair work, the owner must check the wheel nuts/bolts and re-tighten if necessary.
Accelerator; 2) Emergency reversal button; 3) Ignition key; 4) Control lever; 5) Manual mode button; 6) Horn button; 7) Display screen selector button (PLUS
version only); 8) Battery status icon (BASIC version only); 9) Battery status LED (BASIC version only); 10) Manual mode LED; 11) Display (PLUS version only)
Maintenance Checklist
Check magnetic brake air gap.
Electrics
Test instruments, displays and control switches.
Test warning and safety device.
Check fuse ratings.
Make sure wire connections are secure and check for damage.
Test micro switch setting
Check contactors
Frame leakage test
Test cable and motor attachments
Check carbon brush wear, replace if necessary
Power supply
Visually inspect battery
Check battery cable connections are secure, grease terminals if necessary
Check acid density, acid level and battery voltage
Travel
Check motor suspension
Check the transmission for noise and leakage
Replace gear oil if service life exceeded (10,000 hours)
Check travel mechanism, adjust and lubricate if necessary and check tiller recuperating function
Check wheels for wear and damage
Check wheel bearings and attachments
Truck design
Test the operator's platform and check for damage (only QX 2'P EVO)
Check chassis for damage and screw connections
Check labels
Hydraulic operation
Check operation, wear and setting
Agreed performance
Check forks for wear and damage
levels
Test hydraulic system
Check that hose and pipe lines and their connections are secure, check for leaks and damage
Check cylinders and piston rods for damage and leaks, and make sure they are secure
Check hydraulic oil level
Replace hydraulic oil filter
Replace hydraulic oil
Standard ＝ ★
Cold Store ＝ ☆
Brake
36
W
A
B
C
★
★
☆
★
★
★
★
★
★
★
★
☆
★
☆
★
☆
★
★
★
☆
★
☆
★
★
★
★
★
★
★
☆
★
☆
★
☆
★
☆
★
☆
★
☆
★
Publicidad
Solución de problemas
