Polaris W Serie Instrucciones De Instalación página 27

Display on control box
Flashing LED
Error code
(depending on the
(depending on
model)
the model)
PrOG
Very fast
N/A N/A
N/A N/A
If the problem continues contact your retailer:
Deleting an error code
Using the control box:
• After following the troubleshooting solutions, press any key to delete the error code (except the
From the iAquaLink™ app:
• After following the troubleshooting solutions, press Clear Error or OK to perform the steps involved in this solution
at a later time.
Display in the
iAquaLink™ app
• Wait for the update to complete.
Update in
progress
• Do not disconnect the control box.
• Check the status of the Bluetooth/Wi-Fi LEDs on the control
Connection error box and follow the steps described in the table § "5.3 I
Troubleshooting the connection to the iAquaLink™ app".
• Appliance not plugged in or not connected to the home
A red dot appears Wi-Fi network. If the dot is red when the control box is
in the "My plugged in and if the Bluetooth/Wi-Fi icons are lit up, refresh
appliances" list the screen (by swiping downwards).
• If the dot turns green: the appliance is ready for use.
Solutions
) button.
EN
26