Beta 1498CB/30 Manual De Instrucciones página 11

GB
Models: BETA 1498CB/30, for 1Ah to 70Ah batteries
BETA 1498CB/80, for 1Ah to 110Ah batteries
BETA 1498CB/120, for 4Ah to 190Ah batteries
The new cutting edge electronic BETA battery chargers revolutionise the way of charging batteries.
Designed to charge all types of lead batteries, conventional batteries and batteries of the latest generation, they are
particularly suited to withstand extensive charging cycles, even throughout an entire season, for example. For the whole
time in which the vehicle or watercraft is not used but the battery needs to be constantly monitored and its charge held, the
battery charger can be left connected without the risk of damage.
Devised for the vehicle industry, they can also be used in other fields such as sports and leisure. They can be used, for
example, for motorcycles, scooters, sports cars, vintage cars, snow mobiles, lawnmower tractors and so on. They also find
specific use in the field of commercial and farming vehicles, watercraft and mobile homes.
They are ideal for all types of Wet cell lead batteries, with liquid electrolyte, or Dry cell lead batteries, with immobilized
electrolyte (for example, sealed batteries type Gel, Agm and Mf).
All the charging parameters are set using charge function keys on the control panel. Based on the specific model purchased,
you can set:
- the battery voltage (12 or 6 Volt)
- the type of battery (WET cells or sealed GEL-type with immobilized electrolyte)
-the type of vehicle
The battery chargers are also equipped with LED and acoustic indicators, which trigger alarms if the polarity is reversed, if
the battery is faulty and if the voltage is wrong.
They are made of insulating material and can be wall-mounted. They have a high level of protection against external agents
and are safeguarded against overheating and short-circuiting.
They are equipped with clamps, plus a complete set of charging accessories.
CHARGE CYCLES
The charge cycles of the new BETA battery chargers have been developed especially to optimize the charge of all types of
batteries currently on the market. The numerous constructional technologies of batteries currently commercialized (Dry, Gel,
Wet, Agm) require different charging curves to ensure correct and complete charging. The BETA battery chargers extend the
life of your batteries because they ensure the proper charge for each specific battery.
Models: BETA 1498CB/30, for 1Ah to 70Ah batteries
BETA 1498CB/80, for 1Ah to 110Ah batteries
The control and fulfilment of the charge cycle is managed by a microprocessor. The battery chargers of the BETA series have
specific charge cycles based on the type of battery to be charged (Gel or Wet). Each charge cycle is implemented in four
phases: one diagnosis phase and three charge phases (pursuant to standard DIN 41772) (Fig 4).
• diagnosis phase of the state of the
battery "A1".
• First charging phase "I"
• Second charge phase "U0"
• Third charge phase "U"
Model: BETA 1498CB/120, for 4Ah to 190Ah batteries
The control and fulfilment of the charge cycle is managed by a microprocessor. The battery chargers of the BETA series have
specific charge cycles based on the type of battery to be charged (Dry Gel or Wet Agm). Each charge cycle is implemented
in six phases: two diagnosis phases and four charge phases (pursuant to standard DIN 41772) (Fig. 5).
• first diagnosis phase of the state
of the battery "A1".
All manuals and user guides at all-guides.com
INSTRUCTION MANUAL
based on the capacity of the battery.
The battery charger analyses the charge state of the battery to be charged;
if the battery is very low, the battery charger will start to charge with a soft
current charge until the battery reaches the optimal voltage to start the first
charging phase.
The battery is charged at a constant current until it reaches its maximum
voltage.
The battery is charged at a stabilised voltage until the current reaches
minimum values.
The battery is held at a reduced constant voltage.
The battery charger analyses the charge state of the battery to be charged;
if the battery is very low, the battery charger will start to charge with a soft
current charge until the battery reaches the optimal voltage to start the first
charging phase.
11