Oven Functions - Teka HA-855 Hoja De Características

Oven Functions

Oven Switch-Off
Conventional
This function is for use when baking cakes
where the heat should be even to give a
spongy texture.
Conventional with Fan
Suitable for roasts and cakes. The fan spreads
the heat evenly throughout the inside of the
oven to reduce cooking time and temperature.
Grill
Toasting and browning. This function allows
the surface to be cooked without affecting the
inside of the food. Suitable for flat pieces such
as steaks, ribs, fish and toasts.
MaxiGrill
For toasting larger surfaces than possible with
the Grill function, in addition to greater toas-
ting power for faster food browning.
MaxiGrill with Fan
For even roasting and simultaneous surface
browning. Ideal for mixed grills. Perfect for
bulky pieces such as poultry and game. The
meat should be placed on the oven grid with
the tray below to collect meat juices and fat.
14
All manuals and user guides at all-guides.com
Caution
The door must be closed during use with Grill,
MaxiGrill or MaxiGrill with Fan.
Turbo
The fan spreads the heat coming from an
element located at the back of the oven. As a
result of the evenly distributed temperature,
food can be cooked on two levels at the same
time.
This function can also be used for defrosting
food. Set temperature selector to 2.
Lower Element
Heat only comes from beneath. Suitable for
warming plates or letting dough rise.
Lower Element with Fan
This distributes the heat coming from the
lower element. Ideal for pastries with jam or
fruit fillings that only require heat from below.
This function always requires pre-heating.
Grill and Lower Element
Ideal for roasts. This function can be used with
any size joints of meat.
NB
The light remains on with any cooking function.
Setting the Electronic Clock
When you switch on the oven, you will notice
that the word AUTO will flash on the display
with 00:00. Press the + and – symbols until
you hear a beep and see a dot flashing
between the digits of the clock. Then set the
clock time by pressing on the + or – symbols.
You will hear a beep to confirm that the time
has been set. The symbol will remain lit.
Should you wish to change the time, follow
these instructions again.
Manual Operation
After setting the clock, the oven is ready for
use. Select a cooking temperature and function
by pressing and turning the oven controls.
To turn off the oven, set the controls to
Push down on the controls to conceal them.
Electronic Clock Functions
Timer Alarm: An audible signal is produced at
the programmed time, even if the oven is not
being used.
Cooking Time: This function allows you to pro-
gramme cooking time length, after which the
oven will turn off automatically.
Cooking Stop Time: This function allows you
to programme the time for cooking to stop,
after which the oven will turn off automatically.
Cooking Time and Cooking Stop Time: This
function allows both cooking time length and
the stop time to be programmed. The oven
switches on automatically at the set time and
operates for the cooking time it has been pro-
grammed for. It switches itself off automati-
cally at the entered stop time.
Changing the Clock Alarm Tone
1 Press + and - at the same time. You will noti-
ce a dot light up between the + and –
symbols on the clock display.
Oven Use
2 Press MODE and you will see "ton1" light up
on the clock display.
3 The alarm tone can be changed by repea-
tedly pressing on the - symbol.
Programming the Timer Alarm
1 Press on MODE. The symbol will flash on
the clock display.
2 Select the length of time after which you
want the alarm to sound by pressing on
+ or -.
3 The alarm will be confirmed by two conse-
cutive beeps and the display will show the
current time. The symbol will remain lit.
4 At the programmed time, the alarm will
sound and the symbol will begin to flash.
. 5 Press on any symbol to turn off the alarm.
The symbol will continue to flash.
6 Keep pressing MODE until the function is
switched off.
You can see how much time is left at any time
by pressing MODE until the symbol flashes.
You can then change the selected time by
pressing + or -. The beep you hear will confirm
the new time has been set.
Programming Cooking Time
1 Press MODE until you hear a beep. Press
MODE again and the word "dur" will appear
on the clock display.
2 Select the cooking time by pressing + or -.
3 You will then hear a beep and the present
time and the word "AUTO" will light up to
show that the oven will switch off automati-
cally.
4 Select a cooking function and temperature.
5 When the set cooking time is over, the oven
will turn off and an alarm will sound.
15