Best D49M30SB Manual De Instrucciones página 4

PLATE (Purchase Separatly)
COVER
PLATE
FRONT
PANEL
Installations using FLEX BLOWER (in remote location)
or REMOTE BLOWER only:
4. Use the REMOTE DISCHARGE PLATE and determine its
location on FRONT PANEL.
Use a combination of COVER PLATES (3" and/or 6" wide) to
close the opening on side(s) of remote discharge plate.
Slide the remote cover plate and cover plates between the
LOWER CHANNEL and the clamp channel. Tighten the hex
nuts to secure the plates in place.
All manuals and user guides at all-guides.com
8" OR 10" ROUND
REMOTE DISCHARGE
COVER
PLATES
LOWER
CHANNEL
Models D49M30SB • D49M36SB • D49M48SB
SLIDE
CHANNEL
LONG OR
SHORT
SUPPORT
LEGS
All Installations:
5. Slide UPPER SUPPORT BRACKETS into SLIDE CHANNEL
at top left and right of unit.
Attach LONG OR SHORT SUPPORT LEGS (depending upon
cabinet height) to bottom sides of unit with HEX SCREWS
provided. Do not tighten hex screws completely at this time.
UPPER
SUPPORT
BRACKET
Flex Blower
shown
installed.
HEX SCREW
1/4-20 X .500
Page 4