Best D49M30SB Manual De Instrucciones página 5

#8-32 HEX
NUTS
Installations where ELECTRICAL PANEL needs to be
mounted in a remote location only:
6. Remove (4) #8-32 HEX NUTS and ELECTRICAL PANEL.
5-ft. extension cables (purchase separately) may be needed to
mount electrical panel in a remote location. Do not use more
than 2 extension cables.
BLOWER
SUPPORT
LEGS
Installations using FLEX BLOWER only:
7. Attach BLOWER SUPPORT LEGS with (4) SCREWS
provided.
CAUTION: If flex blower will be mounted
!
remotely: Do not use legs alone for support. It
may be necessary to add extra support for the
flex blower. Use mounting brackets supplied with
the blower.
All manuals and user guides at all-guides.com
Models D49M30SB • D49M36SB • D49M48SB
(4) SCREWS
Installations ducting through left, right or rear only:
(Requires purchase of 1-7/8" x 19" to 8" or 10" round transition
and 1-7/8" x 19" rectangular duct cut to appropriate length.)
8. Remove only one RECTANGULAR DISCHARGE COVER.
Installations ducting through left, right or rear only:
(Requires purchase of 1-7/8" x 19" to 8" or 10" round transition
and 1-7/8" x 19" rectangular duct cut to appropriate length.)
9. Beneath the rectangular discharge cover just removed - Use a
pliers to bend (6) TABS outward 90
1-7/8" x 19" rectangular ductwork or 1-7/8" x 19" to 8" or 10"
round transition to housing when installing ductwork.
Page 5
RECTANGULAR
DISCHARGE COVERS
This Front Panel
remains in place.
(6) TABS
Ducting out right side of housing shown.
0
. Use these tabs to connect