Descargar Imprimir esta página

Particle Sensor Display; Filter Monitors - atmosphere 10-1076 Manual Del Propietário

Publicidad

Idiomas disponibles

Idiomas disponibles

Fig. 14a
A B C
Fig. 15
Understanding the Filter Monitor Icon Colors
Color
Green
Amber
Red
Red
NOTE: Whenever a fi lter monitor shows Amber or Red, the Air Purifi er beeps three times each time you press a control button as an
added reminder that a fi lter needs attention.
NOTE: The HEPA and odor fi lter two week duration between the amber and red colored icons is a true two week period regardless
of operating conditions.

Particle Sensor Display

The Particle Sensor is active whenever the Air Purifi er is running. It provides
a display of how clean or dirty the air in the room environment is at any point
Fig. 14
in time. The Particle Sensor fi lter is located inside the left handle on the side
of the purifi er (Fig. 14a).
When the air is very dirty, all fi ve bars are red; as the air is cleaned by the Air
Purifi er, the display changes to four red bars, then to three yellow, two yellow,
and fi nally – when the air is clean – one green (Fig. 14b).
Knowing how clean the air in the room is helps you make an appropriate
selection when setting the fan speed manually. Otherwise, you can select
AUTO Mode by pressing the AUTO button, and let the Particle Sensor control
fan speed.

Filter Monitors

The ATMOSPHERE™ Air Purifi er automatically monitors the condition of
all three of its fi lters, and alerts you when they need replacing (or cleaning
in the case of the Pre-fi lter). The monitors calculate fi lter life based on a
combination of operating hours, speed of operation, and levels of smoke,
dust, and pollen.
The status of each fi lter is indicated by the color of the fi lter icon showing on
the control panel (Fig. 15). Icons A, B, and C represent the Pre, HEPA, and
Odor fi lters respectively.
A summary of what each color represents for each fi lter can be seen in
Understanding the Filter Monitor Icon Colors table.
Which Filters
All 3 Filters
HEPA & Odor
Pre-fi lter
HEPA & Odor
Fig. 14b
Status
Condition satisfactory
Should be replaced soon
Needs cleaning
Replace immediately
10
Duration
Until color changes
About 2 weeks
Until you clean the Pre-fi lter
and reset
Until replace the HEPA or
Odor fi lter and reset

Publicidad

loading