Publicidad
Idiomas disponibles
Idiomas disponibles
Paper Shredder
Operating Instructions
Installation
Warning
Operation
Maintenance
Troubleshooting
Service Center
Limited Warranty
ONE FOLDED SHEET OF PAPER EQUATES TO 2 SHEETS OF PAPER
*
Heavier paper, humidity or other than rated voltage may reduce shredding capacity.
INSTALLATION
Mount the shredder securely to the rim of the waste basket. (FIGURE 1)
A socket-outlet should be near the equipment and be easily accessible.
Connect the power cord to any standard 120 volt AC outlet.
ATIENTION:
This model includes a built-in safety interlock mechanism, which requires the shredder to be correctly
mounted on to the included wastebasket. located on the back center of the shredder, next to the
power cord, there is a curved flap-like shape that must FIT OVER THE OUTSIDE matching ridge of
the wastebasket. (FIGURE #1) THE SHREDDER WILL NOT OPERATE UNLESS IT IS PROPERLY
MOUNTED AS PICTURED!
It is not designed to operate with any other wastebaskets. An activation switch located on the head unit
automatically shuts off the shredder when it is lifted or removed. The supplied wastebasket activates this
switch, which allows the shredder to be operable. lining the wastebasket with a plastic bag will interfere
and may keep the shredder from functioning.
Caution: Crosscut shredders have very sharp exposed blades on the underside.
Use care when mounting the shredder on the wastebasket.
Sheet Capacity
6 Sheets of 20ib. bond paper*
7132 in.
Paper Shred Size
(0.56 em
Paper Entry Width
8.7 in
Credit Card Capacity
1 at a time
Voltage
120V-60Hz
FIGURE 1
1 27132 in. pieces
x
4.7 em pieces}
x
I
22.0 em
I
A
2.0
3
Publicidad
