Aurora ShredSafe WM675XB Manual De Instrucciones página 5

OPERATION
READY: The shredder is currently on STANDBY and ready to operate when paper is inserted. With the
feed slot now exposed, you con shred sheets of paper or 1 credit cord per pass (FIGURE 5).
DISABLED: T h e safety feature has been activated. All power to the SHREDDER IS
CURRENTLY SHUT OFF AND WILL NOT OPERATE until the cover is returned to the "READY"
setting. The cover has been completely tilted beyond the safe position (FIGURE 5).
When shredding is completed, you con press the designated "PUSH CLOSE" area on the cover to tilt
shut the paper feed slot (FIGURE 4). It is recommended to hove the paper feed slot closed when shredder
is not in use to prevent any objects from accidentally getting into the feed slot.
*Be sure to not tilt open the cover completely beyond the preset position, otherwise
the ShredSafe'M power cut off feature will be activated and the shredder will be
inoperable.
Shredding of any of the following materials is considered misuse and will completely
void the product warranty:
Never shred large paper clips, envelopes (any window, insulated, or with glued flaps),
adhesive materials (labels, decals/stickers, glued paper), newsprint, transparencies,
laminated documents, continuous forms, cardboard, or hard and plastic materials
(except Credit Cards).
This shredder will shred staples and small paperclips. It is recommended that you remove paper clips
whenever possible to extend the lifespan of your shredder.
Only shred credit cords by feeding them vertically into the middle of the entry, releasing when
.
shredding begins. Never feed more than one credit cord at a time. DO NOT ACTIVATE REVERSE
FUNCTION WHILE SHREDDING CREDIT CARDS.
Overfeeding the shredder: Shredding beyond the specified sheet capacity con result in extensive
damage to the shredder. Overfeeding will strain the machine and quickly wear and break the cutting
blades and internal components.
Overheating with extended use: In the event that the shredder has shred continuously beyond
the maximum running time and overheating, the unit will automatically shut off. If this happens, switch
the shredder Off for 30 minutes or longer before resuming normal operation.
6
,I,
SliredSafe
""'-'
- (
SHRE DDER STAT US
FIGURE 5