Maintenance And Care - CST/BERGER Lasermark ILM Serie Manual De Instrucciones

ACCESSORIES
Mini Laser Tripod (Fig. 7)
Tilts in two directions allowing the laser to set at any angle.
1. 1/4- 20 thread adapts to 5/8" x 11
2. Platform swivels in both directions to allow laser line positioning at any angle
3. Positioning Knobs
4. Folding tripod legs with non-skid rubber feet
5. 5/8-11 thread mounts to surveying tripod
6. Industrial strength Magnetic Mount
Universal Mount (Fig.8 )
1. Magnets for attachment to steel objects
2. Slots to attach mounting strap vertically or horizontally
3. 1/4- 20 or 5/8-11 threads for tripod
4. 1/4- 20 mounting stud for ILM
Once the Universal Mount is attached to the bottom of the ILM, the unit can be mounted on a 1/4-
20 thread camera tripod, a 5/8" x 11 surveyor's tripod or attached to any ferrous metal surface
(such as steel studs) by using the magnets located on the rear and bottom side of the mount, or
fixed thanks to the strap (supplied) to wood studs, etc.

MAINTENANCE AND CARE

The ILM is not waterproof. Do not allow the unit to get wet. Damage to internal circuits will result.
Do not leave the ILM out in direct sunlight or expose it to high temperatures. The housing and
some internal parts are made of plastic and may become deformed at high temperatures.
Do not store the ILM in a cold environment. Moisture will form on interior parts when warming up.
The moisture could fog up laser windows and cause corrosion of internal circuit boards.
When working in dusty locations, some dirt will collect on the laser window. Remove any moisture
or dirt with a soft, dry cloth. Do not use aggressive cleaning agents or solvents.
Store the ILM in its case when not in use. Remove batteries before storage of the instrument.
All manuals and user guides at all-guides.com
58-ILM • 7