Note:
You can restore any data previously synchronized with
your computer during the next HotSync operation.
To perform a hard reset:
1. Hold down the green power button on the front panel of the
SPT 1500 terminal.
2. While holding down the power button, use the tip of an un-
folded paper clip (or similar object without a sharp tip) to gen-
tly press the reset button.
3. When a message appears on the SPT 1500 terminal screen
warning that you are about to erase all the data stored on your
SPT 1500 terminal, do one of the following:
a. Press the upper half of the scroll button on the front panel
of the SPT 1500 terminal to complete the hard reset and
display the Digitizer screen.
b. Press any other button to perform a soft reset.
Note:
With a hard reset, the current date and time are re-
tained. Formats Preferences and other settings are re-
stored to their factory default settings.
S P T
1 5 0 0
16