Before First Using This Appliance; How To Use This Appliance - Beem Royal Manual De Instrucciones

27. Only fill the utensil up to the maximum mark. Hot water may splash out if you
overfill it.
28. Pull the plug out and allow the utensil to cool before cleaning it.
WARNING of injuries from other causes
29. Do not allow the mains lead to hang over corners (trip-wire effect).
CAUTION – Material damage
30. Never transport the utensil when it is hot, and make sure it is empty before
transporting it.
31. The handles of the tank are only for transportation purposes.
32. Operate the appliance only on a horizontal, even surface. This base must be
heat resistant and sufficiently stable. Think about the overall weight of the
utensil when full.
Always make sure there is a safe distance to flammable parts.
33. The plug must be easily accessible so that you can pull it out quickly if
necessary.
34. Do not place the utensil on a base with a surface which is sensitive to water.
Splashing water or condensed steam could cause damage.
35. Never place the appliance near a gas flame, electric hotplate or other source of
heat. External heat can damage the appliance.

5. Before first using this appliance

• Ensure that all packaging material has been removed from the appliance (protective
film, etc.).
• Under no circumstances remove the rating label or any warning labels.
CAUTION: check that the appliance is not damaged. If any parts are damaged,
do not use the appliance and contact a qualified service engineer.
• Do not place the appliance beneath an overhanging cupboard.
• Clean the appliance and the accessories before using it for the first time. This will
remove any debris that might remain from the production process.

6. How to use this appliance

• Pour the required amount of fresh water and do not fill past the fill level mark.
• Place lid and kettle onto the base unit.
• Ensure that the adjusting knob is turned anticlockwise until it reaches its detent and
that the appliance is switched off with the on/off switch.
• Then insert the plug into the mains socket.
• Switch the appliance on using the on/off switch. The switch will light up.
• The thermostat allows stepless adjustment of the degree of heat. You can choose
between the settings: boil / interval boil / hot / warm.
• If you turn the adjusting knob to the detent, the water will boil rapidly. If you leave
the adjusting knob in this position, the water will boil continuously until it eventually
all evaporates. To prevent this uninterrupted boiling function, turn the adjusting knob
back after the water boils until the blue signal light turns out. Now the thermostat
only switches on again when the temperature of the water drops, heating it again. In
this way, the thermostat regulates energy supply in accordance with requirements,
saving a great deal of energy. The blue signal light switches on and off in the
thermostat cycle.
BEEM – Elements of Lifestyle
All manuals and user guides at all-guides.com
19 / 100