Navigation Inside Corridors; Helix Cutting Mode; Cutting Height Adjustment - Mowox RM 750 BTU-SN Manual De Instrucciones

housing of the robot can damage, move or throw over an obstacle, depending on the
nature of the surface and the type of fastening. Therefore, any objects you wish to
protect within the boundary, such as a garden pond, trees, furniture or flowerbeds,
m u s t b e f e n c e d o u t with boundary wire. The wire must form one complete
circuit loop.
4.3

NAVIGATION INSIDE CORRIDORS

If you have a corridor inside your lawn, your robot will be able to work on it if it is at
least 1.2 meters wide (60 cm between the boundary wires) and max. 8 meters long.
4.4

HELIX CUTTING MODE

If the robotic mower contacted the boundary wire over 5 times, and walked over 1 me-
ter after the last time, it will go into the helix cut for 3 circles. This helix cutting func-
tion improves the mowing result in the centre area of rather big lawns.
4.5 C
UTTING HEIGHT ADJUSTMENT
The robotic mower has continuous cutting height settings between 20 mm and 60
mm. Before first use, please cut the grass down to max. 60 mm with a normal lawn
mower or a grass trimmer.
Do not attempt to raise or lower the cut height during cutting.
.
.
12 (EN)