Secure The Charging Base - Mowox RM 750 BTU-SN Manual De Instrucciones

dock, you might have to adjust the charging station sideways until the robot docks
without any problem.
Stop moving at any time
If you want to stop the robotic mower at any time during cutting, please press the red
STOP button. Once the STOP button is pressed, the lawnmower will stop and wait for
your further commands.
5.6 S
ECURE THE CHARGING BASE
After the robotic lawnmower has started normal operation and the charging stand has
been properly positioned, turn the pegs completely into the ground to secure the
base. Remember: The wire must not be kinked or damaged.
The protective bar from the scope of delivery prevents the robot from unintentionally
breaking out of the working area in case of incorrect initial installation. Attach it under
the station as shown in the sketch.
As last step, please remove the boundary wire from the base
station again, cut off all superfluous length and re-connect it
23 (EN)