Rointe KYROS WIDTH 500 KTI030SEB3 Manual De Instalacion Y Uso página 20

Start programming for AUTOMATIC function
To program the AUTOMATIC mode, see points above and ensure that START
PROGRAMMING is highlighted. Press the
panel will show a flashing screen.
STEP 1 - Select COMFORT mode temperature
COMFORT mode will be programmed first. Select the COMFORT mode
temperature between 19ºC and 30ºC using the
icon and the temperature will flash. Press the
STEP 2 - Select ECO mode temperature
ECO mode will be programmed next. Select the ECO mode temperature
between 7.5ºC and 18.5ºC. The
the button to confirm.
STEP 3 - Select the Days
The days of the week will start flashing on the display panel and show as DAY
1, DAY 2, DAY 3 etc.
Use the and
Press to select the day or days that you wish to include in your AUTOMATIC
program. The day will stop flashing once selected. Repeat for all the days you
wish to program and once all days are selected press the button
onto setting the hour.
STEP 4 - Select the Hours
Once step 3 has been completed, 0h appears on the display panel. 0h is equal
to midnight. Use the
Use the button to change the mode (COMFORT, ECO or nothing) for the hour
you wish to modify. The corresponding icon for that mode will appear at the top
of the screen. To finish the programming press
without pressing any buttons. To change the programming go back to step 1
and proceed as described before.
*If you wish to have individual days with different programming within your
program you will need to modify each day separately, starting from the Main
Menu again for each day/days. Follow Steps 1 to 4 above to program multiple
differing days/hours/temperatures.
20
icon and the temperature will flash. Press
buttons to move forwards or backwards through the days.
or buttons to select the hour you wish to change.
button to access and the display
and buttons. The
button to confirm.
or leave for 30 seconds
to move
12h