VALBERG WF 814 B AID DG 701T Instrucciones De Uso página 14

B
Using the appliance
4. Detergent Dosage Selection*
Auxiliary function button 4 Detergent Dosage
Selection
This auxiliary function allows you to enable or disable auto dosage and to adjust the amount of
liquid detergent according to the soiling level of the laundry you put in your washing machine.
5. Softener Dosage Selection*
Auxiliary function button 5 Softener Dosage
Selection
This auxiliary function allows you to enable or disable auto dosage and adjust softener levels.
*For use of this auxiliary function, please see the descriptions under Section.
Start/Pause button
By pressing on the Start/Pause button, you may start the programme you have selected or
suspend a running programme. If you switch your machine to the standby mode, the Start/
Pause led on the electronic display will blink.
24 EN
B
Using the appliance
Child Lock
The Child Lock function allows you to lock the buttons so that the wash cycle you have chosen
cannot be changed unintentionally.
To activate child lock, press and hold button 4 and 5 simultaneously for at EN - 19 least
3 seconds. ''CL'' will flash on the electronic display for 2 seconds when the child lock is
activated.
If any button is pressed or selected programme is changed by the programme dial while the
child lock is active, the "CL" symbol will flash on the electronic display for 2 seconds.
If the child lock function is active and a programme is running, when the programme dial is
turned to the CANCEL position and another programme is selected the previously selected
programme continues from where it was left.
To deactivate the child lock, press and hold button 4 and 5 simultaneously for at least 3 seconds
until the "CL" symbol on the electronic display disappears.
Cancelling the Programme
To cancel a running programme at any time:
 Turn the programme dial to the "STOP" position.
 Your machine will stop the washing operation and the programme will be cancelled.
 Turn the programme dial to any other programme to drain the machine.
 Your machine will perform the necessary draining operation and cancel the programme.
 You can now select and run a new programme.
25 EN