Useful Information; Cleaning And Maintenance - VALBERG WF 814 B AID DG 701T Instrucciones De Uso

C

Useful information

Cleaning and maintenance

Warning
Turn your mains power supply off and remove the plug from the socket before carrying out
maintenance and cleaning of your machine.
Turn off the water supply before starting maintenance and cleaning of your machine.
CAUTION
Do not use solvents, abrasive cleaners, glass cleaners
or all-purpose cleaning agents to clean your Washing
Machine. They may damage the plastic surfaces and
other components with the chemicals they contain.
Water Inlet Filters
Water inlet filters prevent dirt and foreign materials from entering your machine. We
recommend that these filters are cleaned when your machine is unable to receive sufficient
water, although your water supply is on and the tap is open. We recommend that you clean
your water inlet filters every 2 months.
32 EN
C
Useful information
• Unscrew the water inlet hose(s) from the Washing Machine.
• To remove the water inlet filter from the water inlet valve, use a pair of longnosed pliers
to gently pull on the plastic bar in the filter.
• A second water inlet filter is located in the tap end of the water inlet hose. To remove
the second water inlet filter, use a pair of long-nosed pliers to gently pull on the plastic bar
in the filter.
• Clean the filter thoroughly with a soft brush and wash with soapy water and rinse
thoroughly. Re-insert the filter by gently pushing it back into place.
CAUTION
The filters at the water inlet valve may become clogged
due to water quality or lack of required maintenance
and may break down. This may cause a water leak.
Any such breakdowns are out of the scope of the
warranty.
33 EN