To Select The Micr Font (Fs-7028M) - Kyocera FS-1714M Manual Del Usuario

To select the MICR font (FS-7028M):

Press the MODE key to enter Mode Selection Menu. Then, press the + or – key until the message
1.
display indicates FONT >. If the font type displayed is Scalable, go to step 2. If it is Bit-
map, go to step 5.
Font
Scalable
Press the ENTER key so that ? flashes.
2.
Font
? Scalable
Press the + or – key until Bitmap is displayed.
3.
Font
? Bitmap
Press the ENTER key so that ? disappears.
4.
Font
Bitmap
5. key to enter Bitmap Selection mode. Bitmap font is displayed.
Press the
> Bitmap font
00001
00700 : E13-B
00701 : CMC-7
Press the ENTER key so that ? flashes.
6.
> Bitmap font
? 00001
Press the + or – key until the desired font number is displayed.
7.
> Bitmap font
00700
Press the ENTER key so that ? disappears.
8.
> Bitmap font
? 00700
Press the EXIT key. This returns the menu display to Ready. The MICR font has been selected.
9.
Ready
The MICR font can now be selected for printing through your application software. See the user's
manual for reading fonts/data from a memory card.
6
>
>