Valeo Beep&park/keeper Manual De Instrucciones página 3

Technical Parameters / Parking assist system
•
Voltage: 12V ± 3V
•
Static current: < 25mA
•
Working current: < 300mA
•
Detecting range:
- Driving forward: 0.10~0.99m.
- Reversing backward: 0.10~2.59m.
•
Display range:
- Driving forward: 0.3~0.9m.
- Reversing backward: 0.3~2.5m
•
Temperature: -40°C ~ +85°C
•
Beep volume: 70 ~ 90dB
Caution
•
It is recommended that installation is carried out by an
approved professional auto technician.
•
It is strongly advised to check the position of the sensors
before the definitive drilling of the holes.
•
Valeo Beep&park®/keeper™ helps provide assistance
when reversing and parking. Driving skills, such as
slowing down, use of mirrors etc. are always essential.
All manuals and user guides at all-guides.com
Troubleshooting
1


4
The display does not power on after installation:
1. Is the power supply wire connected correctly?
. Is the ignition turned to ACC ON?
. Is the reverse gear selected?
4. Are all wire connections correct?
. Is the display damaged ?
False reading from the
selecting the reverse gear:
1. Check whether the sensor surface is clean.
. Check whether the sensor wires are plugged in the ECU
properly.
. Check whether the sensor wires are damaged or not.
The display indicates a defective sensor:
1. Check whether the sensor surface is clean.
. Check whether the sensor wires are plugged in the ECU
properly.
. Check whether the sensor wires are damaged or not.
The object position does not correspond to the correct
indicator on the blue digital display.
Are the sensor cables connected to the control unit (ECU) in
the correct order e.g. A. B. C. D. E. F. G. H?
visual display without