FONESTAR DMX-83 Manual De Instrucciones página 8

EN
DELETING A SCENE
- Within programming mode, select the bank where the scene is stored using the BANK UP and BANK
DOWN buttons.
- Press the AUTO / DEL and SCENES 1-8 buttons simultaneously on the scene you want to delete. All LEDs
will flash three times indicating that scene has been deleted successfully.
- Repeat the above steps to delete as many scenes as you want.
- Exit programming mode. The BLACKOUT feature is automatically activated.
COPY AN ENTIRE BANK INTO ANOTHER BANK
- Within programming mode, select the bank where the scenes are stored using the BANK UP and BANK
DOWN buttons.
- Press the ADD button.
- Select the bank where you want to store the scenes using the BANK UP and BANK DOWN buttons.
- Press the MUSIC/BANK COPY button to make a copy. All LEDs will flash three times indicating that
programming has been completed successfully.
- Repeat the above steps to modify as many banks as you want.
- Exit programming mode. The BLACKOUT feature is automatically activated.
PROGRAM A CHASE
- In program mode, select the chase you want to program with the CHASE 1-6 buttons.
- Select the bank where the scene is stored using the BANK UP and BANK DOWN buttons.
- Press the SCENES 1-8 button for the corresponding scene.
- Press the ADD button to store the current scene setting. All LEDs will flash three times indicating that
programming has been completed successfully.
- Repeat the above step to store as many scenes in a chase as you want, up to a maximum of 184 scenes
per chase. The order in which you store the scenes in the chase will be the order in which they will be
played.
- Exit programming mode. The BLACKOUT feature is automatically activated.
REWIEW A CHASE
- In program mode, select the chase you want to review with the CHASE 1-6 buttons.
- Press the DISPLAY/TAPSYNC button, the STEP LED indicator will light up and the display will show the total
number of steps programmed.
- You can check the programming of each programmed chase scene and move between scenes using the
BANK UP and BANK DOWN buttons.
- Exit programming mode. The BLACKOUT feature is automatically activated.
ADD A STEP AT THE END OF A CHASE
- In programming mode, select the chase you want to edit with the CHASE 1-6 buttons.
- elect the bank where the scene you want to add to the chase is located using the BANK UP and BANK
DOWN buttons.
- Press the SCENES 1-8 button for the corresponding scene and then press the ADD button to store the
scene within the chase. All LEDs will flash three times indicating that programming has been completed
successfully. Please note that the scene will be stored at the end of the programming of the current chase.
- Repeat the above steps to add as many scenes to a chase as you want.
- Exit programming mode. The BLACKOUT feature is automatically activated.
- 8 -