Blumfeldt Garden Hero Manual De Instrucciones página 68

EN
68
First use
The control panel will ask for a pass code. The default PIN is "AAAA". Pressing
the start button and closing the flap will cause the robot mower to start a
perimeter circuit after which it will begin randomly mowing the lawn.
The first mowing runs
The first few mows will appear random and unfinished, this is normal. With
the multiple passes the robot mower makes over time, this will even out, and
by using zoning (see section "Zone") and spiral spot mowing (see section "Spot
mow (spot mode)") a desirable effect can be achieved in less time.
New season mowing
Between mowing seasons when the robot mower is not operating (during
winter months) the grass can become unkempt and thickets emerge. On new
season setup review mowing pass and address any problem areas.
Status
Standby
Mowing
Spot Mow
Returning
Charging
Charge to work
Emergency stop
Error
Firmware update
Meaning
The robot mower is ready to work.
The robot mower is mowing automatically.
The robot mower is mowing spirally.
The robot mower is going back to station.
The robot mower is charging.
The robot mower is charging and will continue
program when charged.
The robot mower is stopped manually.
The robot mower cannot work.
The firmware is updating.