EN
72
Charging
1. Place the robot mower in the station (or press the HOME button for
3 seconds)
2. The robot mower will charge up to 100 % and then go into standby.
3. The robot mower will get charged again if battery is lower than 75 %.
The robot mower charges on its station through the two charging rods. These
insert into the front of the robot mower. Ensure the holes are free of debris or
obstructions and that the robot mower aligns when approaching the charge
station. Uneven ground on approach can cause the robot mower to not make a
positive connection first time. If this happens consider levelling the ground or
moving the station to a more suitable area.
Schedule
1. Press the OK button to enter sub-menu 1.
2. Select "schedule".
3. Press the OK button to select the desired day.
4. Press the UP , DOWN , LEFT and RIGHT buttons to set the start
and end time.
5. Press the OK button to confirm the daily setting.
6. Repeat step 3 to 5 to complete the weekly plan.
7. Press the OK button to confirm the weekly setting.
This allows you to change mowing schedules for different days of the week,
for example if you want to prevent mowing to occur on any given day or if
other scheduled activity in the garden would prevent effective mowing during
normal daily schedule.