Blumfeldt Garden Hero Manual De Instrucciones página 71

1. Press OK button to enter sub-menu 1.
2. Select "setting" to enter sub-menu 2.
3. Select "work time".
4. Set work time by UP  and DOWN  buttons (default is 8 hours).
5. Press OK button to confirm setting.
You may want to stop the robot mower during its cutting cycle. To do this:
Stop
1. Press the STOP button.
2. The robot mower stops
immediately and the control
panel hatch opens.
3. The screen shows "emergency
stop".
4. Press the OK or RETURN
button.
5. Enter the PIN code
6. If the robot mower was
running when the STOP
button was pressed, the
screen will show "continue to
work?". You can then either
press OK to continue the task,
or press RETURN to cancel it.
Back to station
1. Press the HOME button for
3 seconds.
2. Close the cover and the robot
mower will return to station
for charging.
EN
71