Blumfeldt Garden Hero Manual De Instrucciones página 87

EN
Wheel spinning faults where the robot mower will stop in a single spot and
wheel(s) spin is a combination of uneven and/or wet ground. The solution is to
add soil to level the ground. Ensure good drainage of the lawn before mowing,
and not to mow during heavy rain and water logging.
If the boundary wires are in the wrong connectors (so the signal is clockwise
not counter-clockwise) then the robot mower will attempt to be outside the
perimeter. If the robot mower leaves the area constantly then change the
wires around at the charging station (moving the wire in red connector to
black and vice versa).
87