Software Update; Resetting The Connection; About Data Protection - Bosch HUI34253UC Manual Del Usario

WITH THE HOME CONNECT™ FEATURE
Step 3: Connecting your hood to another Home Connect™
account
A. Open general settings on your mobile device and then open
Wi-Fi settings. Connect to the same home network (Wi-Fi)
as the hood.
B. Press and hold the "CONNECT" button until the
"CONNECT" and 3 buttons start fl ashing.
C. Open the app on your mobile device and follow the
instructions.
D. The registration process is complete once "CONNECT"
stops fl ashing on the hood.
If you want to change the wireless home network that is
connected to the hood, reset the connection to your hood
by:
A. Press and hold the "CONNECT" and fan setting "0"
buttons on your hood for at least 3 seconds. The
"CONNECT" button will turn off.
B. Repeat the process from step 2.

Software update

Using the software update function, your hood's software
can be updated (e.g. for the purpose of optimization,
troubleshooting or security updates). To do this, you need
to be a registered Home Connect™ user, have installed
the app on your mobile device and be connected to the
Home Connect™ server.
As soon as a software update is available, you will be
informed through the Home Connect™ app and will be
able to start the software update via the app.
Once the update has been successfully downloaded, you
can start installing it via the Home Connect™ app if you
are on your local area network.
The Home Connect™ app will inform you once installation
is complete.
NOTES
• You can continue to use your hood as normal while
updates are downloading.
• Depending on your personal settings in the app,
software updates can also be set to download
automatically.
• We recommend that you install security updates as
soon as possible.

Resetting the connection

You can reset the connections you have saved on your
home network and on Home Connect™ at any time.
• Press and hold the 0 and CONNECT buttons at the
same time until the CONNECT symbol is no longer
illuminated.

About Data Protection

When your appliance is connected for the fi rst time to a WLAN
network, which is connected to the Internet, your appliance
transmits the following categories of data to the Home
Connect™ server (initial registration):
• Unique appliance identifi cation (consisting of appliance
codes as well as the MAC address of the installed Wi-Fi
communication module).
• Security certifi cate of the Wi-Fi communication module (to
ensure a secure IT connection).
• The current software and hardware version of your
domestic appliance.
• Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect™ functions
for use and is only required when you want to use these Home
Connect™ functions for the fi rst time.
NOTE: Ensure that the Home Connect™ functions can be used
only in conjunction with the Home Connect™ app.
Information on data protection can be accessed in the Home
Connect™ app.
English 13