Cleaning And Maintenance; Cleaning Agents - Bosch HUI34253UC Manual Del Usario

CLEANING AND MAINTENANCE

WARNING: To avoid risk of fi re and explosion,
do not use fl ammable liquids or solvents. Always
switch power off at the service panel and lock the
panel to prevent the power from being switched on
accidentally.
Do not use steam cleaners to clean the appliance.
Hidden surfaces may have sharp edges. Use
caution when reaching behind, in or under
appliance.
WARNING: RISK OF ELECTRIC SHOCK
Moisture penetration can cause electric shock. Only
clean appliance with a damp cloth. Prior to cleaning,
switch power off at the service panel and lock the
panel to prevent the power from being switched on
accidentally.

Cleaning agents

To prevent various surfaces from becoming damaged due
to incorrect cleaning agents, follow the specifi cations given
in the table. Do not use:
• cleaning agents that are harsh or scouring,
• cleaning agents with high alcohol content,
• hard scouring pads or sponges,
• high-pressure cleaners or steam cleaners.
Thoroughly rinse all new sponges before use.
English 14
Observe all instructions and warnings accompanying
cleaning agents.
Area Cleaning agents
Stainless steel Warm soapy water:
Clean with a non-abrasive, non-
sponge dish towel and dry with a
clean, soft towel.
Clean stainless steel surfaces in
the grain direction only.
Stainless steel care (such as the
Bosch Stainless Steel Conditioner
#00576696 is available for
purchase from customer service).
(Not to be used with black steel.)
Apply a thin layer of the care
product with a soft cloth.
Painted surfaces Warm soapy water:
Clean with a non-abrasive, non-
sponge dish towel and dry with a
clean,soft towel.
Do not use stainless steel
cleaner.
Aluminum and Glass cleaner:
plastic
Clean with a soft cloth.
Glass Glass cleaner:
Clean with a soft cloth. Do not use
a glass scraper.
Controls Warm soapy water:
Clean with a non-abrasive, non-
sponge dish towel and dry with a
clean, soft towel.
Risk of damage to electronics due
to moisture penetration. Never
clean controls with a wet cloth.
Do not use stainless steel
cleaner.