Handook page
10/128
Installation Guide
T942C- and T942C/2 Central Unit
1.3.3
1.3.4
2003-01-08 / Rev.C
Mounting together with other Units
1
Figure 7. Mounting with other units.
1
Remove upper and lower covers. The lower rectangular covers are used to fasten
units to each other (1).
2
Fasten the module with three screws, see 1.3.1 Mounting on page 6.
Wiring Runs
The plastic partition (shaded in the illustration) is scored to facilitate breaking at
convenient intervals.
• Use pliers to break off a suitable section.
Figure 8. Scored plastic partition for breaking.
1
TD 91684GB
8