Tronic TKHQ 10 A1 Instrucciones De Uso página 16

Plug the car/USB adapter 0 into the 12/24 V socket (cigarette lighter)
♦
in your vehicle.
The operating LED 8 lights up white to indicate that the car/
USB adapter 0 is ready for use.
Depending on the vehicle type, it is possible that the ignition has to be
switched on first.
CAUTION
The total power consumption of the devices connected to the two
►
USB sockets 7/9 may not be higher than 5.4 A. Make sure that the
power consumption of your device is no higher than 3 A when you
are using the USB socket 9 (green). When you are using the USB
socket 7, make sure that the power consumption of your device is no
higher than 2.4 A. Refer to the operating instructions of your device
for more information.
The maximum power output of the car/USB adapter 0 is 5.4 A.
►
The maximum power output of the USB socket (green) 9 is 3 A.
The maximum power output of the USB socket 7 is 2.4 A.
NOTE
The USB socket (green) 9 supports the Qualcomm
►
Charge 3.0 standard. If the connected device is compatible with
TM
this charging standard, it will be detected by the car/USB adapter 0
automatically. The car/USB adapter 0 supplies the appropriate
output voltage or output current so that your device can be charged
more quickly. Devices without this charging standard can also be
charged using the USB socket (green) 9.
TKHQ 10 A1
®
Quick
GB │ IE │
13 ■