Cleaning - Tronic TKHQ 10 A1 Instrucciones De Uso

The mobile phone is not charging (the white LED 3 does not
light up)
No connection to the cigarette lighter or the car/USB adapter 0.
♦
Check the connection.
Depending on the vehicle type, it is possible that the ignition has to
♦
be switched on first.
The white LED 3 flashes rapidly after a mobile phone has been
placed in the car cradle
The mobile phone is not compatible with Qi induction charging
♦
technology and cannot be charged. Use a suitable adapter to charge
your mobile phone by induction charging.
Some mobile phones need to be taken out of their case for charging.
♦
NOTE
If you cannot solve the problem with the above-mentioned solutions,
►
please contact the Service Hotline (see section Service).

Cleaning

CAUTION
Disconnect the device from the cigarette lighter before cleaning.
►
To avoid irreparable damage to the device, ensure that no moisture
►
can penetrate the device during cleaning.
Do not use caustic, abrasive or solvent-based cleaning materials.
►
These can damage the surfaces of the device.
Clean the device only with a slightly moistened cloth.
■
TKHQ 10 A1
GB │ IE │
17 ■