Operation And Use; Charging Your Mobile Phone Wirelessly - Tronic TKHQ 10 A1 Instrucciones De Uso

NOTE
The 12 V output voltage from the USB socket (green) 9 may be
►
lower if there are unfavourable conditions in your vehicle, e.g. when
the engine is switched off or the car battery is weak. This may result in
a longer charging time for your external playback device.

Operation and use

Charging your mobile phone wirelessly

NOTE
The car cradle is not suitable for using the mobile phone in a horizontal
►
direction.
Some mobile phones need to be taken out of their case for charging.
►
At ambient temperatures above 25°C, the charging power is reduced
►
to protect against overheating. This increases the charging time of
your mobile phone.
When a non-compatible mobile phone is placed in the car cradle, the
►
LED 3 flashes. Use a suitable adapter for induction charging.
Place the mobile phone on the supports 5 of the car cradle. The weight
♦
of the mobile phone causes the holding clamps 6 to move inwards
automatically.
Charging starts immediately and is indicated on the display of the
♦
mobile phone. The LED 3 lights up permanently, also signalling that
the mobile phone is being charged.
Adjust the tilt of the car cradle so that the viewing angle of your mobile
♦
phone meets your needs. Undo the screw ring r a little to make it
easier to adjust the ball joint t.
│ GB │ IE
■ 14 TKHQ 10 A1